Which One Is Better, Automatic Polishing Machine Or Manual Polishing

Whether it is stainless steel tableware or glass tableware, polishing is an important criterion for considering product quality. Machine polishing has obvious advantages such as,

  1. Strong versatility, suitable for products of various shapes
  2. No dust, environmental protection, high efficiency,
  3. No need for professional and technical personnel to program, simple operation.

Do you know the reason?

The working time of a person is eight hours per day, and the equipment can work 24 hours a day without interruption of the power supply. For manual polishing, if people stop working and stop working, the mechanical equipment can work continuously without stopping for 24 hours, so it seems that the machine will be better!

Manual polishing does not want to be mechanically polished, and it is impossible to guarantee whether each polished part is the same, and it is easy to have the phenomenon of unqualified work pieces.

Machinery is procedural, which can ensure that each workpiece is consistent, and the pass rate is relatively high.

Even experienced masters cannot guarantee the degree of polishing, but the machine can be set to ensure that the angle of each workpiece is consistent.
The time of manual polishing and the number of polished pieces cannot be guaranteed. The external factors of the machine can be set, the number of replacements is small, and the loss rate of consumables is small.

Which One Is Better, Automatic Polishing Machine Or Manual Polishing

Let’s take an example: tableware polishing series-spoon, knife and fork polishing.

Mechanical polishing is generally an improved version of manual tableware polishing machine, which is controlled by CNC programming to control the mechanical operation. It only needs to manually up and down the tableware. There is programming control for polishing treatment.
The tableware polishing fixture fixes the table spoon for polishing in the polishing area. After polishing, it needs to be replaced manually. It is a semi-automatic tableware polishing machine.

Which One Is Better, Automatic Polishing Machine Or Manual Polishing

Applicable product type:
It is mainly used for polishing tableware spoons, knives and forks. It can also be used for polishing products of similar shapes such as medical appliances. Mechanical characteristics: due to the dining spoon,
The shape of the knife and fork is irregular. The machine adopts a small polishing wheel design. A single polishing wheel polishes a workpiece, so a row of polishing wheels is designed on the machine to match
The fixture can polish sixteen table spoons at a time, which is more efficient. In addition, it adopts semi-automatic configuration and programming control, which improves the previous manual operation and polishing
the process of.

Which One Is Better, Automatic Polishing Machine Or Manual Polishing

To sum up,machine polishing, this kind of polishing time is short and the cost is low. Disadvantages: It is easy to grind off the edges and corners of fine engraving, leaving very rough engraving marks in details and gaps.
Manual polishing, long manual polishing cycle, expensive. Disadvantages: For a long time, there are very subtle engraving and polishing marks in the details and gaps. This is also an important basis for distinguishing between machine polishing and hand polishing.

Therefore, when consumers choose products, they should try their best to look at the quality of the products from the perspective of polishing. If you want to know more product knowledge, welcome to consult us Garbo!

Which One Is Better, Automatic Polishing Machine Or Manual Polishing